Heavy Duty Feather Edge Gate 1800 x 900 x 44mm (6ft x 3ft)

Heavy Duty Feather Edge Gate 1800 x 900 x 44mm (6ft x 3ft)This heavy duty feather edge gate measures 1800 x 900 x 44mm (6ft x 3ft) and is built for garden boundaries, driveways, and rural enclosures where a solid, long lasting timber gate is needed. The 44mm framed construction gives it genuine rigidity and good wind resistance. Specifications Property Detail Material Timber Profile Feather edge board construction Nominal Size 1800 x 900 x 44mm (6ft x 3ft) Frame Thickness 44mm What it's used for Garden side

This heavy duty feather edge gate measures 1800 x 900 x 44mm (6ft x 3ft) and is built for garden boundaries, driveways, and rural enclosures where a solid, long-lasting timber gate is needed. The 44mm framed construction gives it genuine rigidity and good wind resistance.

Specifications

What it's used for

• Garden side gates where a robust, close-board finish provides privacy from the street or neighbouring properties
• Driveway access points on domestic plots where a wider pedestrian gate is needed alongside vehicle gates
• Agricultural and smallholding boundaries where the gate will face exposure to wind, rain, and regular use
• Rear garden entrances on new-build and renovation projects requiring a straightforward, fit-and-forget timber gate

Fitting and handling

Before fitting, stand the gate upright in a sheltered, ventilated space for at least 48 hours to allow it to acclimatise to local conditions, which helps reduce any movement after installation. Hang on two or three heavy-duty hinges fixed to a treated hardwood or concrete gate post, ensuring the post is set at least 600mm into the ground with a concrete collar for stability. Apply a quality exterior wood stain or preservative to all faces, edges, and end grain before and after hanging to extend service life, particularly in the wet climate of South Wales.

FAQ

What size posts do I need for a 1800 x 900mm feather edge gate?

For a gate of this size and weight, 100 x 100mm treated softwood or concrete posts are a common choice. Posts should be set a minimum of 600mm into the ground, concreted in, and allowed to cure fully before the gate is hung.

Does this gate come pre-treated or will I need to treat it myself?

The gate should be treated with an exterior-grade wood preservative or stain before installation. Pay particular attention to end grain cuts, which absorb moisture most readily. Re-treat every one to two years depending on exposure.

Can this gate be cut down to a smaller size on site?

The gate can be trimmed carefully to width or height using a circular saw, but any cut edges must be treated immediately with end-grain preservative to prevent moisture ingress. Avoid removing more than 50mm from any one side to preserve the structural integrity of the frame.

Nottage Timber Merchants supply a full range of fencing materials to complement this gate, including feather edge boards available at our feather edge boards collection. We serve trade and retail customers across Bridgend, South Wales, with next-day delivery available to the local area.